Full Course(Popular)

TK 32000

Course Fee TK 16000

Course Name: HOUSE WIRING AND INDUSTRIAL CONTROLLING
Class
Class Topic
01COMMERTIAL NAME OF HOUSE WIRING MATERIALS AND THEIR SELECTION.
02HOUSE WIRING PRACTICAL PRACTICE.
03TOTAL LOAD CALCULATION PROCEDURE OF A BUILDING.
04HOUSE WIRING CABLE SPECIFICATION AND SELECTION.
05INTRODUCTION TO PUSH BUTTON/SWITCHES/ROTARY SWITCHES ETC.
06INTRODUCTION AND UNDERSTANDING OF SWITCHING CONTACTS- NO/NC TYPES.
07GARMENTS MULTISTORIED BUILDING, FIRE ALARM CIRCUIT INSTALLATION DIAGRAM PRACTICAL PRACTICE.
08SPECIFICATION, SELECTION & CONNECTION DIAGRAM OF MAGNETIC CONTACTOR.
09THREE PHASE MOTOR CONTROL CIRCUIT PRACTICAL PRACTICE BY USING MAGNETIC CONTACTOR.
10SPECIFICATION, AMPERE SELECTION & CONNECTION PROCEDURE OF SAFETY THERMAL OVERLOAD FOR MOTOR.
11THREE PHASE MOTOR PROTECTION CONTROLLING CIRCUIT PRACTICAL PRACTICE BY USING THERMAL OVERLOAD.
12INDUSTRIAL DOL (DIRECT ON LINE) SWITCH PREPARING & CONNECTION PROCEDURE.
13SPECIFICATION, SELECTION & CONNECTION PROCEDURE OF 3 PH INDUCTION MOTOR.
14MOTOR CHECKING PROCEDURE PRACTICAL PRACTICE BY USING MULTIMETER.
15STAR AND DELTA CONNECTION PHYSICAL PRACTICE.
16SPECIFICATION, SELECTION & CONNECTION DIAGRAM OF MAGNETIC RELAY.
17LOAD CONTROLLING CIRCUIT PRACTICAL PRACTICE BY USING MAGNETIC RELAY.
18THREE PHASE MOTOR CONTROL CIRCUIT PRACTICAL PRACTICE BY USING RELAY & MAGNETIC CONTACTOR.
19INTRODUCTION TO PHASE FAILURE RELAY.
20INDUSTRIAL THREE PHASE FAILURE RELAY PREPARING & CONNECTION PROCEDURE.
21MOTOR PROTECTION CIRCUIT PRACTICAL PRACTICE BY USING PHASE FAILURE RELAY.
22SPECIFICATION, SELECTION & CONNECTION DIAGRAM OF ON DELAY TIMER.
23LOAD CONTROL CIRCUIT PRACTICAL PRACTICE BY USING ON DELAY TIMER.
24THREE PHASE MOTOR CONTROLLING CIRCUIT PRACTICAL PRACTICE BY USING RELAY, ON DELAY TIMER & MAGNETIC CONTACTOR.
25FUNCTION AND CONNECTION PROCEDURE OF OFF DELAY TIMER.
26THREE PHASE MOTOR CONTROL CIRCUIT PRACTICAL PRACTICE BY USING OFF DELAY TIMER & MAGNETIC CONTACTOR.
27CONNECTION AND SETTING PROCEDURE OF TWIN/SEQUENTIAL TIMER.
28NAME AND SELECTION PROCEDURE OF VARIOUS INDUSTRIAL METERS.
29MEASURING PROCEDURE PRACTICAL PRACTICE BY USING MULTIMETER.
30MEASURING PROCEDURE PRACTICAL PRACTICE BY USING CLAMP ON METER.
31MEASURING PROCEDURE PRACTICAL PRACTICE BY USING MEGGER TESTER
32CONNECTION PROCEDURE PRACTICAL PRACTICE BY USING ANALOG VOLTMETER.
33CONNECTION PROCEDURE PRACTICAL PRACTICE BY USING DIGITAL VOLTMETER WITH PROGRAMMING.
34CONNECTION PROCEDURE PRACTICAL PRACTICE BY USING ANALOG AMMETER.
35CONNECTION PROCEDURE PRACTICAL PRACTICE BY USING DIGITAL AMMETER WITH PROGRAMMING.
36TRAFFIC SIGNAL CONTROLLING CIRCUIT PRACTICAL PRACTICE BY USING SEQUENTIAL TIMER
37 LOAD (TWO MINUTE ON & 30 SECOND REST) CONTROLLING CIRCUIT PRACTICAL PRACTICE BY USING TIMER.
38AUTO WATER LEVEL CONTROLLING CIRCUIT PRACTICAL PRACTICE FOR MULTI-STOREYED BUILDING/ INDUSTRY.
39MANUAL CHANGE OVER SWITCH CONNECTION PROCEDURE PRACTICAL PRACTICE FOR SUPPLYING DUEL POWER OF A MULTI STORED BUILDING.
40AUTO TRANSFER SWITCH (ATS) CONTROLLING PROCEDURE FOR THREE PHASE LOAD AND PRACTICAL PRACTICE WITHOUT TIMER FOR GENERATOR & REB.
41AUTO TRANSFER SWITCH (ATS) CONTROLLING PROCEDURE FOR THREE PHASE LOAD AND PRACTICAL PRACTICE WITH TIMER TO PROTECT REB FROM HUNTING CURRENT (FOR GENERATOR AND REB).
42BUS BAR COPPER CALCULATION PROCEDURE AND PRACTICAL PRACTICE AS PER VARIATION OF LOAD.
43SAFETY PANEL SWITCHING CONTROL BY USING LIMIT SENSOR OF POWER PLANT.
44MODERN PROXIMITY (2 WIRE) SENSOR, SIGNALING METAL DETECTOR CIRCUIT PRACTICAL PRACTIC.
45MODERN PROXIMITY (3 WIRE) SENSOR, SIGNALING METAL DETECTOR CIRCUIT PRACTICAL PRACTICE.
46PHOTO SENSOR (5 WIRE) CIRCUIT PRACTICAL PRACTICE FOR LIFT.
47MANUAL FORWARD AND REVERSE CONTROLLING CIRCUIT PRACTICAL PRACTICE FOR THREE PHASE MOTOR.
48AUTO FORWARD AND REVERSE CONTROLLING CIRCUIT PRACTICAL PRACTICE USING TIMER FOR THREE PHASE MOTOR.
49STAR DELTA 3 PHASE EASY CONNECTION PROCEDURE FROM MOTOR.
50STAR DELTA 3 PHASE EASY CONNECTION PROCEDURE FROM MOTOR.
51THREE PHASE MOTOR CONNECTION PROCEDURE USING STAR DELTA CONTROL CIRCUIT PRACTICAL PRACTICE.
52ELECTRICAL TROUBLE SHOOTING PRACTICAL PRACTICE FROM INDUSTRIAL PANEL BOARD.
53MPCB (MOTOR PROTECTION CIRCUIT BREAKER) HARDWARE DESCRIPTION & CONNECTION DIAGRAM.
54MMS (MANUAL MOTOR STARTER) HARDWARE DESCRIPTION & CONNECTION DIAGRAM.
55INDUSTRIAL CABLE SELECTION AND CHECKING PROCEDURE.
56SINGLE LINE DIAGRAM PRACTICE FOR SUB STATION
57BENEFIT OF USING POWER FACTOR FOR INDUSTRY.
58ECONOMY POWER FACTOR IMPROVEMENT CAPACITOR SELECTION PROCEDURE.
59P.F.I (POWER FACTOR IMPROVEMENT PLANT) CONTROL RELAY SELECTION, CONTROLLING AND CONNECTION & PRACTICAL PRACTICE.
60P.F.I CONTROLLER PROGRAMMING & PARAMETER SELECTION.
61FAMILIARIZATION WITH INDUSTRIAL DIODE, LED, ZENER DIODE, CHECKING AND PRACTICAL PRACTICE.
62INTRODUCTION TO INDUCTOR, CAPACITOR & RESISTOR.
63TC (THERMOCOUPLE) HARDWARE DESCRIPTION & CONNECTION DIAGRAM.
64TEMPERATURE CONTROLLER CONNECTION PROCEDURE PRACTICAL PRACTICE WITH PROGRAMMING AND TROUBLE SHOOTING.

VFD PROGRAMMING, INSTALLATION & TROUBLE SHOOTING COURSE CURRICULUM
Class Topic
01EVERYTHING ABOUT VFD.
02SPECIFICATION, SELECTION AND CONNECTION PROCEDURE OF THREE PHASE INDUCTION MOTOR.
03MEASURING PROCEDURE PRACTICAL PRACTICE BY USING MULTIMETER.
04MEASURING PROCEDURE PRACTICAL PRACTICE BY USING CLAMP ON METER
05MOTOR CHECKING PROCEDURE FROM MULTIMETER.
06STAR CONNECTION PHYSICAL PRACTICE.
07DELTA CONNECTION PHYSICAL PRACTICE
08VFD HARDWARE DESCRIPTION.
09PRACTICAL CONNECTION OF MOTOR WITH INVERTER.
10INTRODUCTION TO VFD EXTERNAL MODE.
11VFD EXTERNAL MODE WIRING PRACTICAL PRACTICE.
12VFD OPERATION MODE SELECTION
13VFD PARAMETER SETTING.
14VFD FAULT FINDING AND TROUBLE SHOOTING.

PLC COURSE CURRICULUM: (BASIC TO ADVANCED)

Class
Class Topic
01BASIC CONCEPT OF PLC SOFTWARE DATA CABLE OF PLC.
02OVERVIEW & INSTALLATION OF VARIUS PLC SOFTWARES FOR WINDOWS 10
03WIRING PROCESS OF PLC.
04CLEARING SYNCING AND SOURCING CONCEPT BY USING THE WIRING EXAMPLE OF PNP AND NPN SENSORS.
05LOAD CONTROLLING WITHOUT LATCHING CIRCUIT PRACTICAL PRACTICE IN PLC.
06LOAD CONTROLLING IN SERIES CIRCUIT PRACTICAL PRACTICE IN PLC.
07LOAD CONTROLLING IN PARALLEL CIRCUIT PRACTICAL PRACTICE IN PLC.
08MULTIPLE LOAD CONTROLLING IN PARALLEL CIRCUIT USING ONE SINGLE INPUT PRACTICAL PRACTICE IN PLC.
09INTRODUCTION TO INTERLOCKING AND LOAD CONTROLLING PRACTICAL PRACTICE IN PLC.
10CONNECTING SWITCHES IN NO/NC AND CLEARING CONCEPT OF NO/NC PUSH BUTTON CONNECTION PRACTICAL PRACTICE IN PLC.
11INTERLOCKING OF VARIOUS OUTPUTS USING MULTIPLE INPUTS LOGIC PRACTICAL PRACTICE 1.
12INTERLOCKING OF VARIOUS OUTPUTS USING MULTIPLE INPUTS LOGIC PRACTICAL PRACTICE 2.
13INTRODUCTION TO SET/RESET COMMAND AND LOAD CONTROLLING LOGIC PRACTICAL PRACTICE IN PLC.
14INTERLOCKING OF VARIOUS OUTPUTS USING MULTIPLE INPUTS COMBINED WITH SET/RESET COMMAND PRACTICAL PRACTICE 1
15INTERLOCKING OF VARIOUS OUTPUTS USING MULTIPLE INPUTS COMBINED WITH SET/RESET COMMAND PRACTICAL PRACTICE 2.
16INTRODUCTION TO POSITIVE AND NEGATIVE PULSE AND PRACTICAL PRACTICE USING PULSE COMMAND IN PLC.
17INTRODUCTION TO VARIOUS TYPES OF TIMERS IN PLC.
18LOAD CONTROLLING USING ON DELAY TIMER PRACTICAL PRACTICE 1.
19MULTIPLE LOAD CONTROLLING USING DELAY TIMER PRACTICAL PRACTICE 2.
20LOAD AUTO ON/OFF CONTROLLING CIRCUIT USING TIMER PRACTICAL PRACTICE 3.
21LOAD AUTO ON/OFF CONTROLLING CIRCUIT USING TIMER PRACTICAL PRACTICE 4.
22TURNING ON/OFF A MOTOR AND PUMP SEQUENTIALLY BY USING TIMER PRACTICAL PRACTICE IN PLC.
23TURNING ON/OFF A LOAD ONLY BY A GIVEN PERIOD OF TIME ACCORDING TO THE OPERATOR PRACTICAL PRACTICE IN PLC.
24TURNING ON/OFF A LOAD ONLY BY A GIVEN PERIOD OF TIME ACCORDING TO THE OPERATOR BY SETTING A CERTAIN FREQUENCY AND COMBINING AN ALARM IN THE LOGIC PRACTICAL PRACTICE.
25FAMILIARIZATION WITH COMPARISON COMMANDS COMBINED WITH TIMER LOGIC & LOAD CONTROLLING PRACTICAL PRACTICE 1
26FAMILIARIZATION WITH COMPARISON COMMANDS COMBINED WITH TIMER LOGIC & LOAD CONTROLLING PRACTICAL PRACTICE 2
27FAMILIARIZATION WITH COMPARISON COMMANDS COMBINED WITH TIMER LOGIC & LOAD CONTROLLING PRACTICAL PRACTICE 3
28FAMILIARIZATION WITH COMPARISON COMMANDS COMBINED WITH TIMER LOGIC & LOAD CONTROLLING PRACTICAL PRACTICE 4
29DESIGNING A TRAFFIC LIGHT SIMULATOR LOGIC AS PER THE REQUIREMENT OF THE CONSUMER OR THE OPERATOR IN PLC.
30FAMILIARIZATION WITH COUNTER COMMANDS AND LOAD CONTROLLING PRACTICAL PRACTICE IN PLC.
31DESIGNING A LOGIC SUCH THAT AFTER CERTAIN PERIOD OF COUNTING LOAD SHOULD BE ON & THE COUNTER SHOULD BE RESET.
32DESIGNING A BOTTLE COUNTING LOGIC USING COUNTER AND SENSOR PRACTICAL PRACTICE IN PLC.
33FAMILIARIZATION WITH COMPARISON COMMANDS COMBINED WITH TIMER LOGIC & LOAD CONTROLLING PRACTICAL PRACTICE.
34FAMILIARIZATION WITH “MOV” COMMAND AND PREPARE A LOAD CONTROLLING LOGIC BY COMBINING TIMERS IN THE LOGIC IN PLC.
35DESIGN ANOTHER LOGIC TO CHANGE THE TIME OF THE ABOVE LOGIC USING INCREMENT AND DECREMENT COMMAND.
36DESIGNING A LOGIC TO CONTROL THE RUN TIME OF AN OUTPUT BY VARYING THE TIME OF THE TIMER USING “MOV” COMMAND PRACTICAL PRACTICE IN PLC.
37FAMILIARIZATION WITH ARITHMETIC COMMANDS IN PLC.
38DESIGN THE SAME LOGIC AS CLASS 36 BUT TO CHANGE THE TIME USE “INCREMENT” & “DECREMENT” COMMAND.
39FAMILIARIZATION WITH DIFFERENT TYPES OF DATA REGISTERS IN PLC.
40FAMILIARIZATION WITH “SPECIAL BITS” IN PLC.
41INTRODUCTION TO “BMOV” COMMAND.
42DESIGN A LOGIC TO MOVE “BLOCK” OF INFORMATION FROM ONE DATA REGISTER TO ANOTHER.
43INTRODUCTION TO “FMOV” COMMAND.
44INTRODUCTION TO “CALL JUMP” COMMAND.
45INTRODUCTION TO “INTERRUPT” COMMAND AND LOAD CONTROLLING PRACTICAL PRACICE.
46INTRODUCTION TO “INVERT” COMMAND.
47INTRODUCTION TO “MASTER CONTROL” COMMAND AND LOAD CONTROLLING PRACTICAL PRACTICE.
48INTODUCTION TO “PULSE WIDTH MODULATION” COMMAND AND IT’S FEATURES.
49DESIGNING A RETENTIVE TIMER USING DATA REGISTERS IN PLC.
50INTRODUCTION TO “SEQUENCE COMMAND” AND LOAD CONTROLLING PRACTICAL PRACTICE.
51PROGRAM READ/WRITE PROCESS USING DATA CABLE.
52ONLINE MONITORING & TROUBLE SHOOTING PROCESS FROM PC/LAPTOP PRACTICAL PRACTICE
53PROCESS OF CONTROLLING AC LOAD USING DC SUPPLY OR CONTROLLING DC LOAD USING AC SUPPLY PRACTICAL PRACTICE.
54POWER SUPPLY & WIRING OF INPUTS PRACTICAL PRACTICE.
55WIRING OF OUTPUTS PRACTICAL PRACTICE.

HUMAN MACHINE INTERFACE (HMI) PROGRAMMING, CONNECTION & TROUBLE SHOOTING COURSE CURRICULUM

Class Topic
011. INTRODUCTION TO HMI – UNDERSTANDING WIRING & INSTALLATION
022. INTRODUCTION TO VARIOUS TYPES OF SWITCH (MOMENTARY, MAINTAINED, SET, RESET ETC.)
033. SET/RESET BUTTON FUNCTIONS PRACTICAL PRACTICE.
044. INTRODUCTION TO HMI DISPLAY ELEMENTS.
055. BUTTON FUNCTIONS-SET CONSTANTS, INCREMENT & DECREMENT & PRACTICAL IMPLEMENTION ON LOADS.
066. INTRODUCTION TO SIMPLE & MULTI STATE INDICATORS IN HMI & LOAD CONTROLLING PRACTICAL PRACTICE.
077. INTRODUCTION T0 MULTI STATE BUTTONS IN HMI & LOAD CONTROLLING PRACTICAL PRACTICE.
088. INTRODUCTION TO NUMERIC DISPLAY FOR DISPLAYING NUMBER, COUNTS OR PRODUCTION & LOAD CONTROLLING PRACTICAL PRACTICE.
099. INTRODUCTION TO NUMERIC ENTRY FOR GIVING THE INPUT FROM HMI & LOAD CONTROLLING PRACTICAL PRACTICE.
1010. INTRODUCTION TO NUMERIC DISPLAY & GAIN SETTING IN NUMERIC DISPLAY
1111. INTRODUCTION TO MOVING SIGN & PRACTICAL IMPLEMENTATION
1212. OPERATING AND SETTING OF MULTIPLE SCREENS IN HMI & PRACTICAL IMPLEMENTATION.

Call Us

01927-279281
01703-980538
01726-716343
01855-877015

Email

meitc1277@gmail.com

Offices

DUET 2nd Campus Rd 1700 Gazipur, Dhaka Division, Bangladesh

Leave a Reply

Your email address will not be published. Required fields are marked *